Family owned since 2007Ajax · Durham Region · Greater Toronto Area5.0 on Google
What’s your next chapter?

Good homes start
with a conversation.

james@jarviscontracting.ca(289) 892-4169Home additions & renovations
Durham Region & the Greater Toronto Area

Knob and tube wiring is an old wiring method found in houses built from the early 1900s to the 1940s. In Toronto it's legal to keep on three conditions. A May 2025 Electrical Safety Authority (ESA) notice lists them: a 15-amp fuse or breaker, no outlets added to overload it, and visible wires in good condition.

Insurers are the harder part: many won't cover or renew a house with it. We're Jarvis Contracting, a design-build renovation firm, meaning we design the renovation and build it, and we found it renovating a Toronto house about 100 years old.

Key takeaways

  • Existing knob and tube is legal to keep if it meets three conditions. Nobody may install new knob and tube: the 2021 edition of the province's electrical code deleted the rules for it (ESA notice, May 2025).
  • Many insurers won't cover or renew a house that has it, and some want it replaced first (ESA).
  • The Insurance Bureau of Canada (IBC) says to tell your insurer once you confirm the wiring. Some insurers may want a recent ESA certificate, the paper ESA's inspector issues after checking electrical work (IBC, June 2025).
  • Only a licensed electrical contractor should check or change it, and they must tell ESA about the job before starting by filing a notification (ESA). On our renovations, a licensed electrical contractor does that work, not our crew (licensing and warranty).
  • In an Ontario sale, the type of wiring is often considered a material fact, one that could change a client's decision. An agent must tell their own client about it (RECO Bulletin 7.3, 1 December 2023).

Yes. Existing knob and tube wiring is legal in Ontario if it meets three conditions, but no one may install more of it. ESA's May 2025 notice lists the conditions for knob and tube hidden in walls and floors that feeds lights and outlets. The third is judged on whatever parts of the wire are exposed:

ESA conditionWhat it means in your house
A 15-amp fuse or breaker protects itSwapping in a 20- or 30-amp fuse is one of the unsafe habits ESA lists
No outlets added to overload the circuitOutlets tapped onto the old wires that overload the circuit break the rule, and ESA says only a licensed electrical contractor should add outlets
The wires you can see look soundCracked insulation, scorch marks or bad splices mean it should come out

Note: these are ESA's rules for keeping old wiring. Each insurer sets its own.

The same notice says the 2021 edition of Ontario's electrical code removed the install rules, and that the code "is not retroactive". So you can't add new knob and tube, but the old wiring didn't become illegal with the code change. ESA's knob and tube page is blunt: it "is safe, provided it is properly maintained by a Licensed Electrical Contractor".

ESA also lists what owners do to get by on old wiring. They run extension cords as permanent wiring. They put bigger fuses in. They tap new outlets onto old circuits, or snap the ground pin (the third prong) off a plug to fit a two-pin outlet. If you want to swap a two-pin outlet for a three-prong one on an old circuit, ESA says to use a ground fault circuit interrupter outlet. The code allows that type where there's no ground wire. A brand-new outlet is different: it needs a new grounded circuit.

Will insurers cover a Toronto house with knob and tube?

Some insurers will cover a Toronto house with knob and tube. Many won't. ESA says many won't provide or renew coverage on these homes because they see more risk. Its May 2025 notice adds that some want "a total replacement of this wiring" before they'll cover you.

IBC speaks for Canada's home insurers. Its two guides say to expect three things (Know your home's history, June 2025; How home insurance rates are set):

  • Once you confirm the wiring, tell your insurance representative.
  • Some insurers may ask for a recent ESA certificate before they keep your coverage.
  • Insurers ask about old wiring, fuses and electrical service under 100 amps (service is how much power the house's main supply can carry). They may want new wiring, 100-amp service with breakers, or an inspection by a licensed electrician.

IBC also flags 60-amp service. Houses with it may lose some coverage or pay a surcharge (an extra charge on the premium) until they move up to at least 100 amps. So when you ask an electrician about the wiring, ask about the service and the electrical panel (the box of fuses or breakers) too.

Who should inspect knob and tube wiring?

A licensed electrical contractor, a company licensed by ESA to do electrical work, should inspect knob and tube, not a general contractor or a home inspector. In this post, "the electrician" means that contractor. ESA recommends hiring one to assess your home's electrical system. ESA says this assessment differs from a home inspection because it looks only at the electrical. The electrician checks for wear and damage and may tell you to replace the knob and tube.

If you plan to change the wiring at all, the electrician does the work and files a notification with ESA. ESA's notice also says the homeowner should arrange an ESA inspection. That sign-off is what your insurer may ask to see.

We're the general contractor on our jobs. A licensed electrical contractor does the electrical work on them, as our licensing and warranty page says. We open the walls, book the electrician, and close up once the wiring passes inspection.

Knob and tube replacement cost in Toronto: what drives it

Four things set the cost of replacing knob and tube in Toronto: access, the service, room rules and hidden damage. We don't publish a price for rewiring. We also haven't found a regulator or insurer page we'd trust for a Toronto range.

  • How much wiring the electrician can reach. With the plaster on, they pull new cable through closed walls and you patch every hole. With the walls open for a new kitchen or a gut renovation (walls stripped to the studs), the old wiring is in plain view.
  • Whether the service goes too. IBC says insurers may want 100-amp service with breakers. That's a separate cost from the wiring.
  • Rules for the rooms you touch. New outlets follow today's electrical code, ESA says. That means grounded circuits, and ground fault protection outside, in bathrooms and within 1.5 m of a kitchen sink.
  • What else the walls hide. Water damage, mould or a beam problem adds its own work. The next section shows real cases.

The cheapest time to replace knob and tube is when the walls are already open. James Jarvis, who runs our construction, gives the same advice in our story: "If you can, do it all at once". If you're planning a whole-home renovation, put the wiring in scope from day one. Keep a contingency for what nobody can see yet, as our renovation budget guide explains.

What else is behind the walls of an older Toronto house?

An older Toronto house can hide water damage, mould, asbestos and structural problems alongside knob and tube. On three of our jobs, we opened the walls and found this:

ProjectWhat we foundSource
Aurelia, Toronto, about 100 years oldKnob and tube, water damage throughout, a main floor out of levelProject page
Lark House, in progressA vine growing into the house, wiring that needs attention, then mouldInstagram, 25 Sept 2026; Instagram, 29 Sept 2026
Bellamy, ScarboroughAsbestos, fire hazards and a point load (one spot carrying weight from above) in the basementAbout page

Lark House is still being built, and so far we've said only that its wiring needs attention, not what kind it is.

At Aurelia, the owners had a baby on the way. The date couldn't move. When we opened the house we found the knob and tube, the water damage and the uneven floor. All of it was dealt with before the finishes went in: a licensed electrical contractor did the rewiring, and we levelled the floor and repaired the water damage. The whole job took a couple of months. "When you're working in 100-year-old homes, you never know what you're going to find," James said on site.

At Lark House we stripped the house back to its structure in September 2026. Behind the walls we found the vine and the wiring. On 29 September we showed the mould removal: we're removing it and correcting the moisture problem behind it before the finishes go back in.

At Bellamy we found asbestos, fire hazards and a point load in the basement. We still handed the house back on the day we promised, as our story tells. IBC's advice on asbestos matches what we do: don't touch it yourself, and have a specialist remove it before work starts (IBC).

Ceara, James's wife, runs design for us through her studio, Juliette Interiors. She designed all three houses. Our crew built two of them and is still building Lark House. None of the repairs at Aurelia show in its finished photos. Hidden problems like these are why the first weeks of demolition can move a schedule.

Do you have to disclose knob and tube when selling in Ontario?

An Ontario agent must tell their own client about knob and tube, but whether you as the seller must tell the buyer is a legal question. The Real Estate Council of Ontario (RECO) lists the type of wiring, such as knob and tube, among items "often considered to be material facts" (Bulletin 7.3, December 2023). A material fact is one that could change a client's decision, and agents must find and disclose material facts to their own client.

The seller's duty works differently. RECO Bulletin 7.4 says it comes from case law, not the real estate act. A seller doesn't have to disclose a patent defect, one a buyer or their home inspector could spot, but shouldn't hide it. A seller must disclose a latent defect: a hidden problem that makes a home unfit to live in or dangerous, which a careful inspection wouldn't reveal. The bulletin tells agents to send sellers for a legal opinion when in doubt. We're builders, not lawyers, so take RECO's advice and ask a lawyer.

Where our part of the job stops

We don't assess or install wiring, and this page isn't an electrical inspection. A licensed electrical contractor decides whether your knob and tube can stay, and ESA inspects the work. Your insurer decides whether it will cover the house. Your lawyer and agent advise you on what to disclose. Our part is the renovation around it: we open the walls, fix the water damage, framing or floors we find, and build it all back.

To replace knob and tube during a renovation, start with our whole-home renovation page. Our wet room bathroom with a tub post shows the wet room we're building at Lark House. Or read how we phase a whole-home remodel in Toronto.

Questions

Is knob and tube wiring safe?

Yes, if it's properly maintained. Ontario's electrical regulator, ESA, says knob and tube wiring is safe when a licensed electrical contractor maintains it. Its May 2025 notice lets existing wiring stay on a 15-amp fuse or breaker, with no outlets added to overload it, and with the visible wires in good shape. Wiring that is damaged, overheated, badly spliced or overloaded should be replaced.

Can I get home insurance in Ontario with knob and tube wiring?

Sometimes, but expect to shop around. ESA says many insurers won't cover or renew a home with knob and tube wiring, and some want it replaced first. The Insurance Bureau of Canada says to tell your insurer once you confirm the wiring. Some insurers may ask for a recent ESA certificate. Get quotes from more than one insurer and ask what each one needs.

Can I add an outlet to a knob and tube circuit?

Don't add outlets to a knob and tube circuit yourself. ESA calls that an unsafe practice and says a licensed electrical contractor should do the work and file a notification. A brand-new outlet has to meet today's electrical code, which means a new grounded circuit.

Can a general contractor replace knob and tube wiring?

No, a general contractor can't. In Ontario a licensed electrical contractor does electrical work in your home and files a notification with ESA. On our renovations, the electrician does the wiring and we handle the walls, ceilings and finishes around it. Replacing knob and tube while the walls are open saves opening them twice.

Do I have to replace knob and tube before selling my house?

ESA doesn't require it. Its May 2025 notice lets existing knob and tube stay if it meets three conditions, and it calls "all knob and tube wiring must be disconnected and replaced" a myth. The Real Estate Council of Ontario's bulletins on disclosure don't require replacement either. Your buyer's insurer may still ask for it: ESA says some insurers want the wiring replaced before they'll cover a home.

Disclosure is a separate question. RECO lists the type of wiring among facts often considered material, which an agent must disclose to their own client. Whether a seller must tell the buyer depends on the law of latent defects, and RECO tells agents to send sellers for a legal opinion when in doubt.

Sources

  1. Electrical Safety Authority (ESA) notice esasafe.com
  2. ESA esasafe.com
  3. IBC, June 2025 ibc.ca
  4. ESA esasafe.com
  5. RECO Bulletin 7.3, 1 December 2023 reco.on.ca
  6. How home insurance rates are set ibc.ca
  7. Instagram, 25 Sept 2026 instagram.com
  8. Instagram, 29 Sept 2026 instagram.com
  9. stripped the house back to its structure instagram.com
  10. RECO Bulletin 7.4 reco.on.ca