A wet room bathroom with a tub is one waterproofed room. The shower has no curb, the floor slopes to a drain, and the tub stands in the same waterproofed space. Greenwood, in east-end Toronto (2026), has a freestanding tub under a skylight. Lark House, still being built, has a drop-in tub with a quartz surround.
Key facts
| Question | Short answer |
|---|---|
| Can a wet room have a tub? | Yes. Greenwood has a freestanding tub; Lark House has a drop-in tub with a quartz surround. |
| What does the Ontario Building Code require? | A waterproof wall finish (the wall's surface) at least 1.8 m up in a shower stall and 1.2 m above the rim of a tub with a shower (Article 9.29.2.1). |
| What does a membrane maker require for a curbless shower? | Waterproofing on every area exposed to water, wet and drying areas both (Schluter handbook, 04/2026). |
| What does it cost with us? | Our one published bathroom range is a basement bathroom at $25,000 to $50,000 before tax (pricing). Every other bathroom, ensuites included, is priced after a site visit. |
What is a wet room, and can it have a tub?
A wet room is a bathroom with no curb or raised shower base, and yes, it can hold a tub. The floor slopes to a drain, and the waterproofing covers the whole floor, not just the shower. The tub is either freestanding, standing on the finished floor, or drop-in, lowered into a built and tiled box (the deck) so only its rim shows.
A membrane maker's handbook explains why the whole floor matters. Schluter, which makes waterproofing membranes for tile, says curbless showers "rely on the slope of the floor" to send water to the drain. Its membrane goes on "all floor areas subject to water exposure", meaning the shower zone and the drying zone, where you step out and dry off (Schluter handbook, 04/2026). On our jobs, the waterproofing goes behind and under the tile (bathroom renovations).
Here's how the two tub types compare in a wet room:
| Freestanding tub | Drop-in tub | |
|---|---|---|
| Our example | Greenwood | Lark House |
| How it sits | On the finished, waterproofed floor | Inside a built deck; here, a quartz surround |
| Floor under it | Tiled and waterproofed like the rest of the room | Hidden by the deck, so ask how the floor under it is waterproofed |
| Ledge for bottles | None, unless you add a niche | The deck itself, plus a niche |
Note: this compares how each is built, not how each performs.
Wet room layouts with a tub: two of our builds
Greenwood and Lark House each put the shower and the tub in one wet room. Ceara, who runs design for us through her studio, Juliette Interiors, designed both rooms. Our crew built Greenwood and is building Lark House.
Greenwood, east-end Toronto. The Greenwood wet room sits on a new storey. Greenwood is a narrow house: we took off its top floor and built a new storey in its place. In the primary ensuite, the vanity area opens through a glass door into the wet room, which sits under a skylight.
The room holds a brass rain shower, a linear drain (a long, narrow slot drain) and, as we posted in May 2026, "both a shower and a freestanding tub". Two long niches, shelves recessed into the wall, run above the tub in glossy zellige-style tile (a handmade-look glazed tile) and marble-look slab. The skylight brings daylight in from above; as we posted, the room is "all flooded with incredible natural light".
Lark House, in progress. The Lark House wet room has curved pony walls: low walls built partway up, not to the ceiling. An arched niche sits beside the drop-in tub and its quartz surround (walkthrough reel, 22 October 2026). An arched opening will lead through to a walk-in closet filled with natural light. One correction from that reel: where the video mentions the curve behind the tub, it's behind the toilet, as the reel's caption notes. The house is still under construction.
What the two share:
- The tub and shower share one wet room.
- Niches are built into the wall, not added on as shelves.
- The room's shape comes from the design: a skylight in one, curves and arches in the other.
How is a wet room waterproofed?
A wet room is waterproofed with a membrane, a waterproof sheet bonded under the tile, across the whole floor and the wet walls, sealed at every seam and corner. The floor slopes to the drain. Ontario's Building Code sets the minimum wall heights, and the handbook for the membrane system you use sets the method.
What the Building Code requires. Ontario's 2024 Building Code sets minimum heights for a waterproof wall finish, the surface you see, in Article 9.29.2.1. The membrane behind it is covered by the maker's handbook, below. The City of Markham reprints the article for builders:
| Location | Minimum height of waterproof finish |
|---|---|
| Shower stall | 1.8 m above the floor |
| Bathtub with a shower | 1.2 m above the tub rim |
| Bathtub without a shower | 400 mm above the tub rim |
Note: these are minimums for the wall finish. A second article, 9.29.10.4, puts tile around tubs and showers over moisture-resistant backing, the board the tile is fixed to.
What a membrane maker requires. Those heights are for the wall finish. The membrane behind it follows the maker's handbook, which can ask for more. Schluter's installation handbook (04/2026) is one example. Here is what it asks for:
- Membrane in "all areas subject to water exposure".
- A sealing band, a strip of waterproof tape, at every floor to wall joint.
- Membrane around a tub "up to the height of the showerhead at minimum".
- Shelves and sills sloped toward the drain, which matters for a deep niche or a tub deck.
- Sealant in the gap between a tub and the floor membrane.
- A water test before tile, which it strongly recommends, at least 24 hours after the membrane; for a curbless shower, a temporary dam across the threshold.
Every membrane system has its own handbook. Ask your contractor two things: which system they're using, and whether the water test is in the schedule.
Permits and trades. Adding a bathroom or moving drains needs a building permit, and your town's building department confirms whether your job does (bathroom renovations). A licensed electrical contractor does the lights and fan, not us (licensing and warranty).
How much does a wet room bathroom cost in Ontario?
We don't publish a wet room price. Our only published bathroom range is for a basement bathroom: $25,000 to $50,000 before Ontario's sales tax (pricing). The top end is when new plumbing goes under the concrete slab. Every other bathroom, ensuites included, we price after a site visit. The first estimate is free.
What moves a wet room's cost differs from house to house. Our bathroom renovations page lists the main drivers; here is how they apply to a wet room:
- Moving the toilet, shower or drain, which also decides whether you need a permit.
- Tile size, pattern and coverage, since a wet room usually tiles the whole floor and most walls.
- The vanity, glass and fixtures.
- Water damage under the old floor, found once it comes up.
- Sales tax on top.
Neither of our examples gives you a standalone number. Greenwood's wet room was one room in a job that also built a new storey, a rear extension and a bigger basement. Lark House is still under way. Our design-build timeline explains what happens before construction starts on a larger job. And on Aurelia, what we found behind the walls of a house about 100 years old (an out-of-level floor, water damage and knob-and-tube wiring) shows why an old house can change the number once it's open.
Wet room pros and cons
A wet room with a tub suits you if you want no curb and one tiled room you can wipe down. It suits a small room less. There, the toilet and vanity sit in the shower's spray.
| Pros | Cons |
|---|---|
| No curb or raised shower base to step over | The whole floor has to be waterproofed and sloped, not just a shower base |
| Shower and tub share one waterproofed zone, with nothing to step over between them | Spray can reach the toilet and vanity unless the layout or a low wall stops it |
| A glass door or curtain is optional when the layout keeps spray off the toilet and vanity | More tile and membrane area than a standard bathroom |
| A skylight or open plan works because nothing blocks the light | A secondary drain may be needed in the drying area, depending on drain placement (Schluter, 04/2026) |
Note: we have no resale data for wet rooms, so resale isn't on this list.
What we can't tell you yet
Lark House isn't finished. We can't report how its wet room has held up in use. Greenwood was handed over in 2026, so it hasn't been through many years of use either. We also haven't tested one membrane system against another; the handbook we quote above is one maker's, not a ranking.
If you're planning a wet room in an ensuite or main bathroom, a price starts with a site visit. For a basement bathroom, the published range above is a fair starting point. Our Vaughan bathroom guide covers the planning steps for any bathroom.
Questions
Can you put a bathtub in a wet room?
Yes, a bathtub can go inside a wet room, either freestanding on the waterproofed floor or dropped into a built, tiled deck. Our Greenwood wet room in Toronto has a freestanding tub beside the shower, and our Lark House wet room has a drop-in tub with a quartz surround. Either way, the tub shares one open room with the shower.
Is a wet room the same as a curbless shower?
A wet room and a curbless shower are closely related but not the same. A curbless shower removes the step into the shower area. A wet room goes further. The whole wet room floor is waterproofed and sloped to a drain, and the shower and often the tub share one open room.
How high does waterproofing go around a tub in Ontario?
Ontario's 2024 Building Code requires a waterproof wall finish, the surface you see, at least 1.2 m above the rim of a tub with a shower. Without a shower, the minimum is 400 mm. In a shower stall the minimum is 1.8 m above the floor. Membrane makers can ask for more: Schluter's handbook says up to the showerhead at minimum.
Do I need a permit for a wet room bathroom?
A wet room bathroom needs a building permit when it adds a bathroom or moves drains, which a wet room does if it moves the drain. Replacing fixtures where they already are usually doesn't need one. Your municipality's building department makes the call, and any electrical work goes through a licensed electrical contractor.
How much does a wet room bathroom cost?
Jarvis Contracting doesn't publish a wet room price. Our only published bathroom range is for a basement bathroom: $25,000 to $50,000, plus tax. Every other bathroom, ensuites included, is priced after a site visit. Moving the drain, the amount of tile and what's under the old floor all change the cost.
Sources
- Article 9.29.2.1 markhammuseum.ca
- Schluter handbook, 04/2026 assets.schluter.com
- as we posted in May 2026 instagram.com
- walkthrough reel, 22 October 2026 instagram.com
- 2024 Building Code ontario.ca
